Chapter 3 Hardware Operation
3-1
2. Please click on the four corner
spot of touch pad starting from
top-left in counterclockwise
direction.
Chapter 3 Hardware Operation
3.1 Calibration
After nishing installation, you should be able to hand write right away.
If you found that the inking you wrote is not centered on screen, you need
to calibrate your touch-pad to remap the active area.
1. If you chose to install the New Handwriting/Mouse mode, please choose
the “Calibration” option from the Mouse menu to launch the touch pad
calibration program; if you chose to install the Traditional mode, please
choose the “Calibration” option from the Full Screen or Writing Pad
menu to launch the touch pad’s calibration program.
Traditional Full Screen mode
New Mouse mode
Traditional Writing
Pad mode
To Next Page
Loading...