Penpower Junior Silver - Touch-Pad Operation

3-2
2. Click: Hit the touch-pad once.
3. Dragging: Hit the touch-pad
twice quickly, and move the pen
on the panel while second pen
down.
4. Double click: it the touch-pad
twice quickly.
5. There are three buttons on the touch-pad as normal mouse functionality,
but the middle button is dened to toggle pen mode and mouse mode.
The left button would be revised for error correction on pen mode state.
While you press the left button once each time, the latest recognized
result would be replaced with the next candidate word. It lets you correct
the result quickly without switching to mouse mode.
3.2 Touch-Pad Operation
1. Moving: Put the pen on the touch-pad, and then move it on the panel
gently.
TIP : The three buttons are not on a line for some touch-pad.
The alone one is the middle button.
TIP : You can click the mode button on the window to
switch mouse mode and pen mode.
TIP : After calibration, the new conguration would take effect immediately. You
do not need reboot or reload Penpower Jr. handwriting system.
Note: When calibrating the Penpower miniCard please orient the touch pad so it’s
in landscape mode.