Pentax K20D User Manual

104
Shooting Functions
4
Focusing
You can focus with the following methods.
You can also choose the autofocus mode from l (Single mode) where
the shutter release button is pressed halfway to focus on the subject and
the focus is locked at that position, and k (Continuous mode) where
the subject is kept in focus by continuous adjustment while the shutter
release button is pressed halfway. The factory default setting is l.
1 Set the focus mode lever to
l or k.
=
Autofocus
The camera is focused when the shutter release
button is pressed halfway.
\
Manual focus Manually adjust the focus.
Using the Autofocus
l
Single mode
When the shutter release button is pressed
halfway to focus on the subject, the focus is
locked at that position.
k
Continuous mode
The subject is kept in focus by continuous
adjustment while the shutter release button
is pressed halfway. Even if the subject is not
in focus, the shutter can be released when
the shutter release button is pressed fully.

Pentax K20D Specifications

General

Camera Type	Digital SLR
Sensor Type	CMOS
Sensor Size	23.4 x 15.6 mm
Resolution	14.6 MP
Continuous Shooting Speed	3 fps
Image Stabilization	Sensor-shift
Screen Size	2.7 inches
Screen Resolution	230, 000 dots
Storage Media	SD/SDHC
Dimensions	141.5 x 101 x 70 mm
Weather Sealing	Yes
Image Processor	PRIME (Pentax Real Image Engine)
Shutter Speed	30-1/4000 sec
Viewfinder	Optical (pentaprism)
Battery	Rechargeable Lithium-Ion battery
ISO Range	ISO 100 - 3200 (expandable to 6400)