235
Camera Settings
10
Using Pixel Mapping
Pixel mapping is a function for mapping out and correcting for defective
pixels in the CMOS sensor.
1
Select [Pixel Mapping] in the [R Set-up] menu.
2
Press the four-way controller
(5).
3
Press the four-way controller (23) to select [Pixel
Mapping] and press the 4 button.
Defective pixels are mapped and corrected.
When the battery level is low, [Not enough battery remaining to activate Pixel
Mapping] is displayed on the monitor. Use the AC adapter D-AC50 (optional)
or use a battery with ample capacity remaining.
Pixel Mapping
Cancel
Pixel Mapping
For checking the image
sensor assembly to make
adjustments
OK
To Next Page
Loading...
