Pentax K20D User Manual

125
Shooting Functions
4
Remote Control Shooting (Remote
Control F: Sold Separately)
The shutter can be released from a distance by using the optional remote
control unit. You can select from h (remote control), i (3 sec. delayed
release), or i (remote continuous shooting) for remote control shooting.
1 Mount the camera onto a tripod.
2 Press the { button.
The Fn menu appears.
3 Press the four-way controller (2).
The Drive Mode options screen appears.
4 Use the four-way controller (45) to select h.
h
The shutter will be released immediately after the shutter release button
on the remote control unit is pressed.
i
When the shutter release button on the remote control unit is pressed, the
shutter is released after about 3 seconds.
i
Continuous shooting starts when the shutter release button on the
remote control unit is pressed. Press the shutter release button on the
remote control unit again to exit continuous shooting.
Exit
E x i t
Exit
Fn
AUTO
AUTO
AUTO
OK
Fn
CUSTOM IMAGE

Pentax K20D Specifications

General

Camera Type	Digital SLR
Sensor Type	CMOS
Sensor Size	23.4 x 15.6 mm
Resolution	14.6 MP
Continuous Shooting Speed	3 fps
Image Stabilization	Sensor-shift
Screen Size	2.7 inches
Screen Resolution	230, 000 dots
Storage Media	SD/SDHC
Dimensions	141.5 x 101 x 70 mm
Weather Sealing	Yes
Image Processor	PRIME (Pentax Real Image Engine)
Shutter Speed	30-1/4000 sec
Viewfinder	Optical (pentaprism)
Battery	Rechargeable Lithium-Ion battery
ISO Range	ISO 100 - 3200 (expandable to 6400)