Pentax K20D User Manual

44
Getting Started
2
Turning the Camera On and Off
1 Move the main switch to [ON]
position.
The camera will turn on.
Move the main switch to [OFF] position
to turn off the camera.
• Always turn the camera off when not in use.
• The power will automatically turn off when you do not perform any operations
within a set period of time. To reactivate the camera after the camera turns
off automatically, turn it on again or perform any of the following.
• Press the shutter release button halfway.
• Press the Q button.
• Press the M button.
•
By default, the camera is set to power off automatically after 1 minute of
inactivity. You can change the setting with [Auto Power Off] on the [
R Set-up]
menu. (p.233)

Pentax K20D Specifications

General

Camera Type	Digital SLR
Sensor Type	CMOS
Sensor Size	23.4 x 15.6 mm
Resolution	14.6 MP
Continuous Shooting Speed	3 fps
Image Stabilization	Sensor-shift
Screen Size	2.7 inches
Screen Resolution	230, 000 dots
Storage Media	SD/SDHC
Dimensions	141.5 x 101 x 70 mm
Weather Sealing	Yes
Image Processor	PRIME (Pentax Real Image Engine)
Shutter Speed	30-1/4000 sec
Viewfinder	Optical (pentaprism)
Battery	Rechargeable Lithium-Ion battery
ISO Range	ISO 100 - 3200 (expandable to 6400)