Pentax K20D - Connecting the Camera to the Printer

209
Printing from the Camera
9
1 Turn off the camera.
2 Face the arrow on the provided USB cable toward the S
mark on the camera, and connect the camera and
PictBridge compatible printer.
The PictBridge logo is displayed on PictBridge compatible printers.
3 Turn the printer on.
4 After printer start-up is complete,
turn the camera on.
The PictBridge menu appears.
Connecting the Camera to the Printer
PictBridge menu is not displayed if [USB Connection] is set to [PC].
Single Image
All Images
DPOF AUTOPRINT
OK
O K
OK
Select printing mode
S e l e c t p r i n t i n g m o d e
Select printing mode
OK