Pentax K20D User Manual

40
Getting Started
2
Inserting/Removing the SD Memory
Card
This camera uses either an SD Memory Card or an SDHC Memory Card. (Both
cards are referred to as SD Memory Cards hereafter.) Make sure the camera is
turned off before inserting or removing the SD Memory Card (market product).
1 Lift the card cover unlock lever
(1) and turn it towards OPEN
(2).
The card cover opens.
2 Insert the card all the way with
the SD Memory Card label
toward the monitor.
Push the SD Memory Card in once to
remove.
3 Close the card cover.
• Do not remove the SD Memory Card while the card access lamp is lit.
• Use this camera to format (initialize) an SD Memory Card that is unused or
has been used on other cameras or digital devices. Refer to “Formatting the
SD Memory Card” (p.218) for details on formatting.
Be sure to fully close the card cover. The
camera will not turn on if the card cover is
open.
1
2

Pentax K20D Specifications

General

Camera Type	Digital SLR
Sensor Type	CMOS
Sensor Size	23.4 x 15.6 mm
Resolution	14.6 MP
Continuous Shooting Speed	3 fps
Image Stabilization	Sensor-shift
Screen Size	2.7 inches
Screen Resolution	230, 000 dots
Storage Media	SD/SDHC
Dimensions	141.5 x 101 x 70 mm
Weather Sealing	Yes
Image Processor	PRIME (Pentax Real Image Engine)
Shutter Speed	30-1/4000 sec
Viewfinder	Optical (pentaprism)
Battery	Rechargeable Lithium-Ion battery
ISO Range	ISO 100 - 3200 (expandable to 6400)