Pentax K20D User Manual

199
Processing Images
8
4 Press the four-way controller (2345) to select the RAW
image to edit and press the 4 button to select the check
box (O).
Press the 4 button again to clear the check box (P).
Turn the rear e-dial toward f to select single-image display and view the
image.
You can select up to 100 images at a time.
5 Press the { button and use the four-way controller (23)
to select [Open].
To specify the parameters, select [Change Setting]. See “Specifying the
Parameters” (p.200).
6 Press the 4 button.
The save confirmation screen appears.
7 Use the four-way controller (23) to select [Save as JPEG]
or [Save as TIFF].
Press the 3 button to return to the previous screen. Select [Cancel]
and press the 4 button to return to single-image playback mode.
8 Press the 4 button.
All selected RAW images are edited and saved in a new folder.

Pentax K20D Specifications

General

Camera Type	Digital SLR
Sensor Type	CMOS
Sensor Size	23.4 x 15.6 mm
Resolution	14.6 MP
Continuous Shooting Speed	3 fps
Image Stabilization	Sensor-shift
Screen Size	2.7 inches
Screen Resolution	230, 000 dots
Storage Media	SD/SDHC
Dimensions	141.5 x 101 x 70 mm
Weather Sealing	Yes
Image Processor	PRIME (Pentax Real Image Engine)
Shutter Speed	30-1/4000 sec
Viewfinder	Optical (pentaprism)
Battery	Rechargeable Lithium-Ion battery
ISO Range	ISO 100 - 3200 (expandable to 6400)