Pentax K20D User Manual

63
Basic Operations
3
1 Press the K button.
The built-in flash pops up and begins
charging. When the flash is fully charged,
E appears in the LCD panel and
viewfinder.
(p.27, p.29)
2 Press the shutter release button halfway.
The focus indicator ] appears in the viewfinder when focused.
3 Press the shutter release button fully.
The picture is taken.
4 Push down on the portion
indicated in the illustration to
retract the flash.
Using Built-in Flash
• When the mode dial is at B, the flash is not discharged when the lighting
conditions do not require flash for correction even if the flash is popped up.
• The Flash On is used when the flash is popped up if the mode dial is at a
setting other than B.

Pentax K20D Specifications

General

Camera Type	Digital SLR
Sensor Type	CMOS
Sensor Size	23.4 x 15.6 mm
Resolution	14.6 MP
Continuous Shooting Speed	3 fps
Image Stabilization	Sensor-shift
Screen Size	2.7 inches
Screen Resolution	230, 000 dots
Storage Media	SD/SDHC
Dimensions	141.5 x 101 x 70 mm
Weather Sealing	Yes
Image Processor	PRIME (Pentax Real Image Engine)
Shutter Speed	30-1/4000 sec
Viewfinder	Optical (pentaprism)
Battery	Rechargeable Lithium-Ion battery
ISO Range	ISO 100 - 3200 (expandable to 6400)