99
Shooting Functions
4
6
Press the shutter release button
fully.
For g, the self-timer lamp starts blinking
slowly and then blinks rapidly 2 seconds
before the shutter is released. The beep
is heard and the rate increases. The
shutter will be released about 12 seconds
after the shutter release button is pressed fully.
For Z, the shutter will be released about 2 seconds after the shutter
release button is pressed.
• Select a mode other than g or Z in the Drive Mode setting screen to cancel
the self-timer shooting. The setting is canceled when the camera is turned off
if [Drive Mode] is set to P (Off) in [Memory] (p.195) of the [A Rec. Mode 3]
menu.
• The Shake Reduction function is automatically turned off when g or Z is set.
• You can set the camera so that the beep does not sound. (p.186)
To Next Page
Loading...
