125
Shooting Settings
5
1
Press the four-way controller (3) in Capture mode.
The White Balance setting screen appears.
After turning the power on, if you have taken any images before pressing
the four-way controller (3), the last image taken is displayed in the
background.
2
Use the four-way controller (45)
to select the white balance.
When J (Fluorescent Light) is selected,
press the four-way controller (3) and use
the four-way controller (45) to select D,
N, W, or L.
3
Press the 4 button.
The camera is ready to take a picture.
You can adjust the white balance depending on the light source when
taking pictures. With the manual white balance, the camera can store
delicate shades that cannot be precisely adjusted with the white balance
preset values provided in the camera. This provides the optimum white
balance for your surroundings.
1
Select K in Step 2 on p.125.
Because the light source changes when a flash discharges, you can set the
white balance for when the flash discharges. Select [Auto White Balance],
[Unchanged] or [Flash] in [5. WB When Using Flash] (p.68) of the [A Custom
Setting 1] menu.
Adjusting the White Balance Manually
Auto White Balance
WB
±
Cancel
OK
OK
MENU
WB
±
MENU
SHUTTER
Manual White Balance
Cancel
Adjust
OK
OK
To Next Page
Loading...
Need help?
General
