Pentax Q - Compensating Flash Output

58
Basic Operations
3
The flash modes that can be selected differ depending on the capture
mode.
*1 Fixed to a in the K (Sunset), d (Blue Sky), A (Night Scene), Z (Night Scene HDR),
p (HDR), y (Backlight Silhouette), U (Candlelight), n (Stage Lighting) or
E (Museum) mode.
1 Press the four-way controller (4) in Capture mode.
The Flash Mode setting screen appears.
The flash modes that can be selected for the set capture mode appear.
2 Use the four-way controller (45)
to select a flash mode, and press
the 4 button.
The camera is ready to take a picture.
You can change the flash output in a range of –2.0 to +1.0. The following
flash compensation values can be set in increments of 1/3 EV or 1/2 EV
depending on the lens being used.
Capture Mode Selectable Flash Mode
n/H
*1
/u C/i/E/F/a
e/c C/i/E/F/G/H/I/a
b/a C/i/E/F/I/a
Compensating Flash Output
Step Interval Flash Compensation Value
1/3 EV
–2.0, –1.7, –1.3, –1.0, –0.7, –0.3, 0.0, +0.3, +0.7, +1.0
1/2 EV
–2.0, –1.5, –1.0, –0.5, 0.0, +0.5, +1.0
Auto Flash Discharge
Auto Flash Discharge
0.0
0.0
Cancel
Cancel
OK
OK
OK
MENU