144
Shooting Settings
5
Setting the Green Button and E-dial
Functions
You can assign one of the following functions to the d/i button and
access the function by simply pressing the button when shooting.
1
Select [Green Button] in the [A Rec. Mode 3] menu, and
press the four-way controller (5).
The [Green Button] screen appears.
2
Press the four-way controller
(5), use the four-way controller
(23) to select a function, and
press the 4 button.
3
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
Setting the Green Button Operation
Green Button Resets the values being adjusted. (default setting)
Preview
While the d/i button is pressed, you can check the depth of
field by stopping down the aperture to the set value. (p.94)
One Push File
Format
Temporarily changes the file format. Simultaneously saves an
image in both JPEG and RAW formats, regardless of the [File
Format] setting. You can set whether to apply the setting to
only one image or not, and select the file format when the
d/i button is pressed. (p.145)
AE Lock
The exposure setting is locked when the d/i button is
pressed. (p.82)
Enable AF
Autofocus is performed only when the d/i button is pressed
and not when the shutter release button is pressed halfway.
(p.90)
Green Button
Preview
One Push File Format
AE Lock
Enable AF
Green Button
Cancel
MENU
OK
OK
To Next Page
Loading...
Need help?
General
