Pentax Q User Manual

32
Before Using Your Camera
1
5 Press the 4 button.
The camera returns to the control panel and is ready to take a picture.
This section explains how to use the following menus: [A Rec. Mode],
[C Movie], [Q Playback], [R Set-up] and [A Custom Setting].
Below, how to set [High-ISO NR] in the [A Rec. Mode 2] menu is
explained as an example.
1 Press the 3 button in
Capture mode.
The [A Rec. Mode 1] menu appears on
the monitor.
The menus listed below are displayed in
the following situations.
2 Press the four-way controller
(5).
Each time the four-way controller (5) is
pressed, the menu will change in the
following sequence: [A Rec. Mode 2],
[A Rec. Mode 3], [C Movie 1],
[Q Playback 1] ... [A Rec. Mode 1].
You can also change the menu by turning the e-dial.
You can also change the setting by turning the e-dial after selecting the item
you want to change in Step 2. Detailed settings such as parameters can be
changed after pressing the 4 button.
Using the Menus
When the mode
dial is set to C
[C Movie 1] menu
In Playback
mode
[Q Playback 1] menu
Custom Image
Custom Image
Digital Filter
Digital Filter
Image Capture Settings
Image Capture Settings
Focus Settings
Focus Settings
AE Metering
AE Metering
ND Filter
ND Filter
Exit
Exit
MENU
1 23

Pentax Q Specifications

General

Category	Digital Camera
Type	Mirrorless
Sensor Type	CMOS
Sensor Size	1/2.3 inch
Effective Pixels	12.4 MP
Lens Mount	Pentax Q-mount
LCD Screen Resolution	460, 000 dots
Continuous Shooting	5 fps
Video Recording Frame Rate	30 fps
Storage Type	SD/SDHC/SDXC
Dimensions	98 x 57.5 x 31 mm
ISO Sensitivity	125-6400
LCD Screen Size	3.0 inches
Shutter Speed	1/2000 - 30 sec
Video Resolution	1920 x 1080
Battery Type	D-LI68
Weight	200 g (including battery)