232
11
Appendix
Error Messages
Error Messages Description
Memory card full
The SD Memory Card is full and no more images
can be saved. Insert a new SD Memory Card or
delete unwanted images. (p.43, p.165)
You may be able to save more images if you
change the image capture settings. (p.120)
No more image/movie
can be saved
The SD Memory Card has 65,535 image/movie
files saved on it and no more files can be saved.
Insert a new SD Memory Card or delete
unwanted files. (p.43, p.165)
No image
There are no images that can be played back on
the SD Memory Card.
This image cannot be
displayed
You are trying to play back an image in a format
not supported by this camera. You may be able
to play it back on another brand of camera or a
computer.
No card in the camera
There is no SD Memory Card inserted in the
camera. (p.43)
Memory card error
The SD Memory Card has a problem, and image
capture and playback are impossible. It may be
viewable on a computer but not with this camera.
Card is not formatted
The SD Memory Card you have inserted is
unformatted or has been formatted on another
device and is not compatible with this camera.
Use the card after formatting it with this camera.
(p.198)
Card is locked
The write-protect switch on an SD Memory Card
you have inserted is locked. Unlock the SD
Memory Card.
This image cannot be
enlarged
You are trying to enlarge an image that cannot be
enlarged.
This image is protected
You are trying to delete an image that is
protected. Remove protection from the image.
(p.199)
Not enough battery
power remaining to
activate Pixel Mapping
Appears during Pixel Mapping if the battery level
is insufficient. Install a fully charged battery, or
use the AC adaptor kit K-AC115 (optional). (p.40)
To Next Page
Loading...
Need help?
General
