EasyManuals Logo

Pentax Q User Manual

Pentax Q
258 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
5
Do not clean the product with organic solvents such as thinner, alcohol, or benzine.
Use a lens brush to remove dust accumulated on the lens. Never use a spray blower
for cleaning as it may damage the lens.
Please contact a PENTAX Service Center for professional cleaning of the CMOS
sensor. (This will involve a fee.)
Do not store the camera with preservatives or chemicals. Storage in high
temperatures and high humidity can cause mold to grow on the camera. Remove the
camera from its case and store it in a dry and well-ventilated place.
Avoid using or storing the camera where it may be exposed to static electricity or
electrical interference.
Avoid using or storing the camera in direct sunlight or in locations where it may be
exposed to rapid changes in temperature or to condensation.
Periodic inspections are recommended every one to two years to maintain high
performance.
The SD Memory Card is equipped with a write-
protect switch. Setting the switch to LOCK
prevents new data from being recorded on the
card, the stored data from being deleted, and the
card from being formatted by the camera or
computer.
The SD Memory Card may be hot when removing
the card immediately after using the camera.
Do not remove the SD Memory Card or turn off the power while the card is being
accessed. This may cause the data to be lost or the card to be damaged.
Do not bend the SD Memory Card or subject it to violent impact. Keep it away from
water and store away from high temperatures.
Do not remove the SD Memory Card while formatting. The card may be damaged and
become unusable.
Data on the SD Memory Card may be deleted in the following circumstances. We do
not accept any liability for data that is deleted if
1. the SD Memory Card is mishandled by the user.
2. the SD Memory Card is exposed to static electricity or electrical interference.
3. the SD Memory Card has not been used for a long time.
4. the SD Memory Card or the battery is removed while the card is being accessed.
If the SD Memory Card is not used for a long time, the data on the card may become
unreadable. Be sure to regularly make a backup of important data on a computer.
Format new SD Memory Cards. Also format SD Memory Cards used with other
cameras.
Cleaning Your Camera
Storing Your Camera
Other Precautions
Write-protect
switch

Table of Contents

Other manuals for Pentax Q

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pentax Q and is the answer not in the manual?

Pentax Q Specifications

General IconGeneral
CategoryDigital Camera
TypeMirrorless
Sensor TypeCMOS
Sensor Size1/2.3 inch
Effective Pixels12.4 MP
Lens MountPentax Q-mount
LCD Screen Resolution460, 000 dots
Continuous Shooting5 fps
Video Recording Frame Rate30 fps
Storage TypeSD/SDHC/SDXC
Dimensions98 x 57.5 x 31 mm
ISO Sensitivity125-6400
LCD Screen Size3.0 inches
Shutter Speed1/2000 - 30 sec
Video Resolution1920 x 1080
Battery TypeD-LI68
Weight200 g (including battery)

Related product manuals