Pentax Q - Connecting the Camera and a Computer

206
Connecting to a Computer
9
Connect the camera to a computer using the provided USB cable I-USB7.
1 Turn the computer on.
2 Turn off the camera, and use the USB cable to connect the
PC/AV terminal of the camera and the computer.
3 Turn the camera on.
The camera is recognized as a removable disk or an SD Memory Card
with a volume label “PENTAX Q”.
If the “PENTAX Q” dialog appears when the camera is turned on, select
[Open folder to view files using Windows Explorer] and click the OK
button.
4 Save the captured images to the computer.
Copy the image file(s) or folder(s) to the hard disk of the computer.
5 Disconnect the camera from the computer.
Connecting the Camera and a Computer