200
Changing Additional Settings
8
You can select a naming system for folders to store images.
Set in [Folder Name] (p.184) of the [R Set-up 2] menu.
You can select a method for assigning the file number of an image when
saved to a new folder. Set in [File No.] in [Memory] (p.195) of the [A Rec.
Mode 3] menu.
Changing the Naming System for Folders
Date
The two digits of the month and day on which the picture was taken
are assigned as the folder name in the form of [xxx_MMDD]. [xxx] is a
sequential number from 100 to 999. [MMDD] (month and day) appears
according to the display format set in [Date Adjustment] (p.50).
(default setting)
Example) 101_0125: Folder for images taken on January 25th
PENTX
The folder name is assigned in the form of [xxxPENTX].
Example) 101PENTX
When the number of storable images exceeds 500, captured images are
divided into folders of 500 images each. However, in Exposure Bracketing
shooting, images will be stored in the same folder until shooting is completed,
even if the number of images exceeds 500.
Selecting the File Number Setting
O
The file number of the last image saved to the previous folder is saved and
subsequent images are assigned sequential file numbers even if a new
folder is created.
P
The file number of the first image saved to a folder returns to 0001 each time
a new folder is created for saving images.
To Next Page
Loading...
Need help?
General
