Pentax Q User Manual

192
Changing Additional Settings
8
Set the initial menu tab displayed on the monitor when the 3 button
is pressed.
1 Select [12. Save Menu Location] in the [A Custom Setting
2] menu, and press the four-way controller (5).
The [12. Save Menu Location] screen appears.
2 Use the four-way controller (23) to select [Reset Menu
Location] or [Save Menu Location], and press the 4
button.
3 Press the 3 button.
The screen that was displayed before selecting the menu appears again.
You can set the Instant Review (p.55) display settings.
1 Select [Instant Review] in the [A Rec. Mode 3] menu, and
press the four-way controller (5).
The [Instant Review] screen appears.
2 Press the four-way controller
(5), use the four-way controller
(23) to select a display time,
and press the 4 button
Setting the Initial Menu Tab Displayed
1
Reset Menu
Location
The [A Rec. Mode 1] menu ([C Movie 1] menu in C
mode, and [Q Playback 1] menu in Playback mode) is
always displayed first. (default setting)
2
Save Menu
Location
The menu tab last selected is displayed first.
Setting the Display for Instant Review
Instant Review
Instant Review
Display Time
Display Time
1sec.
1sec.
3sec.
3sec.
5sec.
5sec.
Off
Off
Histogram
Histogram
Bright/Dark Area
Bright/Dark Area
Enlarge Instant Review
Enlarge Instant Review
Cancel
Cancel
MENU
OK
OK
OK

Pentax Q Specifications

General

Category	Digital Camera
Type	Mirrorless
Sensor Type	CMOS
Sensor Size	1/2.3 inch
Effective Pixels	12.4 MP
Lens Mount	Pentax Q-mount
LCD Screen Resolution	460, 000 dots
Continuous Shooting	5 fps
Video Recording Frame Rate	30 fps
Storage Type	SD/SDHC/SDXC
Dimensions	98 x 57.5 x 31 mm
ISO Sensitivity	125-6400
LCD Screen Size	3.0 inches
Shutter Speed	1/2000 - 30 sec
Video Resolution	1920 x 1080
Battery Type	D-LI68
Weight	200 g (including battery)