82
Shooting Functions
4
AE Lock is a function that locks the exposure (brightness) prior to taking a
picture. Use this when the subject is too small or is backlit and a proper
exposure setting cannot be obtained.
First, assign the AE Lock function to the d/i button.
1
Select [Green Button] in the [A Rec. Mode 3] menu, and
press the four-way controller (5).
The [Green Button] screen appears.
2
Press the four-way controller
(5), use the four-way controller
(23) to select [AE Lock], and
press the 4 button.
3
Press the 3 button twice.
The AE Lock function is assigned to the d/ i button and the camera is
ready to take a picture.
• When [Autofocus Method] (p.87) is set to [AF Select (25 Points)], [Select] or
[Spot], the focus position is locked in the first image and is used for
subsequent images.
• Switch to a mode other than l or c in the Drive Mode setting screen to
cancel Exposure Bracketing. The setting is canceled when the camera is
turned off if [Drive Mode] is set to P (Off) in [Memory] (p.195) of the [A Rec.
Mode 3] menu.
• You can combine Exposure Bracketing with the built-in flash or an external
flash (P-TTL auto only) to change only the flash output continuously.
Locking the Exposure Before Shooting
(AE Lock)
Green Button
Preview
One Push File Format
AE Lock
Enable AF
Green Button
Cancel
MENU
OK
OK
To Next Page
Loading...
Need help?
General
