Name: Pentax Q
Brand: Pentax
Rating: 4 (1 reviews)

To Next Page

To Previous Page

227

Appendix

Cleaning the CMOS Sensor

If the CMOS sensor becomes dirty or dusty, shadows may appear in the

image in certain situations such as when shooting against a white

background. This indicates that the CMOS sensor must be cleaned.

Shaking the CMOS sensor removes dust that has collected.

Select [Dust Removal] in the [R Set-up 3] menu, and press

the four-way controller (5).

The [Dust Removal] screen appears.

Press the 4 button.

The Dust Removal function is activated

by shaking the CMOS sensor.

To activate the Dust Removal function

every time the camera is turned on and

off, set [Start-up Action] and [Shut-down

Action] to O.

When Dust Removal is completed, the camera returns to the [R Set-up

3] menu.

Removing Dust by Shaking the CMOS Sensor

(Dust Removal)

Use a brush-less blower to remove dirt and dust from the CMOS sensor. Using

a blower with a brush may scratch the CMOS sensor. Do not wipe the CMOS

sensor with a cloth.

Dust Removal

Start-up Action

Shut-down Action

Start

Pentax Q Specifications

General

Pentax Q User Manual

Other manuals for Pentax Q