179
Editing Images
7
You can correct images where the flash has caused the subject to appear with red eyes.
1
Select an image to edit in Playback mode, and press the four-
way controller (
3
).
The playback mode palette appears.
2
Use the four-way controller (2345) to select Z (Red-
eye Edit), and press the 4 button.
The save confirmation screen appears.
3
Use the four-way controller (23) to select [Save as], and
press the 4 button.
The edited image is saved as a new image.
Editing Out the Unwanted Red-eye Effect
• Only JPEG images captured with this camera can be used for the Red-eye
Edit function.
• The Red-eye Edit function does not work on images where red eyes cannot
be detected on the camera. An error message appears in Step 3.
To Next Page
Loading...
