55
Basic Operations
3
3
Position the subject inside the
AF frame, and press the shutter
release button halfway.
The autofocus system operates.
The AF frame turns green and you will
hear a beep when the subject comes into
focus.
When set to n (Auto Picture) mode,
the optimal capture mode is automatically
selected from U (Standard), c (Portrait), s (Landscape), b (Macro),
. (Night Scene Portrait), K (Sunset), d (Blue Sky) or x (Forest).
(p.70)
4
Press the shutter release button fully.
The picture is taken.
This action is referred to as “releasing the shutter” or “release”.
5
Review the captured image on the monitor.
The image appears for 1 second on the monitor shortly after capturing
(Instant Review).
1Setting the Display for Instant Review (p.192)
You can enlarge the image during Instant Review with the e-dial. (p.155)
You can delete the image during Instant Review by pressing the d/i
button.
1Deleting a Single Image (p.62)
• The shutter sound and the beep that sounds when the image is focused can
be turned off. (p.186)
• You can set the camera so that pressing the d/i button will focus
automatically, in the same way as pressing the shutter release button
halfway. (p.90)
• You can preview the image on the monitor and check the depth of field before
taking pictures. (p.94)
1/
2000
F2.8
1600
[
37
]
AF frame
To Next Page
Loading...
Need help?
General
