103
Shooting Functions
4
3
Press the four-way controller
(3), use the four-way controller
(45) to select g or h, and press
the 4 button.
The camera is ready to take pictures
continuously.
4
Press the shutter release button halfway.
The autofocus system operates.
5
Press the shutter release button fully.
Pictures are taken continuously while the shutter release button is fully
pressed. Take your finger off the shutter release button to stop.
• The drive mode is fixed to g when the capture mode is set to \ (Moving
Object)/Z (Pet)/R (Kids) of H (Scene) mode.
• The focus position is locked in the first frame.
• If [File Format] is changed to [RAW] or [RAW+] while g is selected, the
shooting mode is temporarily changed to h.
• The shutter cannot be released until charging is complete when using the
built-in flash. You can set the camera to enable the shutter release before the
built-in flash is ready in [11. Release While Charging] of the [A Custom
Setting 2] menu. (p.60)
• Select a mode other than g or h in the Drive Mode setting screen to cancel
the continuous shooting. The setting is canceled when the camera is turned
off if [Drive Mode] is set to P (Off) in [Memory] (p.195) of the [A Rec. Mode
3] menu.
Continuous Shooting (Hi)
Cancel
OK
OK
MENU
To Next Page
Loading...
Need help?
General
