114
Shooting Functions
4
5
Use the four-way controller (45) to select hours,
minutes, or seconds, and use the four-way controller
(23) to set the time.
Press the four-way controller (5) to finish the setting.
6
Use the four-way controller (23) to select [Start Interval],
and press the four-way controller (5).
7
Use the four-way controller (23) to select [Now] or [Set
Time], and press the 4 button.
If you selected [Now], proceed to Step 10.
8
Use the four-way controller (23) to select [Start Time],
and press the four-way controller (5).
9
Use the four-way controller (45) to select hours or
minutes, and use the four-way controller (23) to set the
time.
Press the four-way controller (5) to finish the setting.
10
Use the four-way controller (23) to select [Start
Shooting], and press the 4 button.
After the message [Press the shutter release button to start interval
shooting] appears, the monitor turns off.
11
Press the shutter release button halfway.
The autofocus system operates.
12
Press the shutter release button fully.
When [Start Interval] is set to [Now], a picture is taken immediately,
Instant Review is displayed, and then the monitor display turns off. When
the number of pictures set in [Number of Shots] has been taken, [Interval
shooting complete] is displayed, and then the camera turns off.
To Next Page
Loading...
