118
Shooting Functions
4
5
Press the d/i button.
The screen to select segment(s) to delete is displayed.
6
Use the four-way controller (45)
to move the selection frame, and
press the 4 button.
The segment(s) to delete are specified.
Press the 4 button again to cancel the
selection.
7
Press the 3 button.
The screen that was displayed in Step 4 appears again.
8
Press the 4 button.
The save confirmation screen appears.
9
Use the four-way controller (23)
to select [Save as], and press the
4 button.
The movie is divided at the specified
points and the unwanted segments are
deleted from it. And then the divided
movie is saved as separate files and
displayed on the screen.
Specify the dividing points in chronological order from the beginning of the
movie. When canceling the selected dividing points, cancel each of them in
reverse order (from the end of the movie to the beginning). In an order other
than specified, you can neither select the frames as a dividing point nor cancel
the selections of the dividing point(s). You cannot, for example, select the
frames prior to the last selected frame as a dividing point while specifying
dividing point(s).
Select segments for deletion
Select segments for deletion
00'00"
00'00"
OK
MENU
MENU
Saves divided movie
as separate files
Save as
Cancel
OK
OK
To Next Page
Loading...
Need help?
General
