181
Editing Images
7
The following parameters can be changed.
5
Use the four-way controller (45) to change the value.
Press the four-way controller (5) to display the setting screen for White
Balance and Custom Image.
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller (23) to select [Save as], and
press the 4 button.
The RAW image is developed and saved as a new image.
8
Use the four-way controller (23) to select [Continue] or
[Exit], and press the 4 button.
Select [Continue] to edit other images. The screen for selecting the
parameter in Step 5 appears again.
Parameter Value Page
Aspect Ratio K/J/I/L p.121
Recorded Pixels
JPEG recorded pixels corresponding to
the aspect ratio
p.122
Quality Level C/D/E p.123
Color Space sRGB/AdobeRGB p.123
Custom Image
Bright/Natural/Portrait/Landscape/Vibrant/
Radiant/Muted/Bleach Bypass/Reversal
Film/Monochrome/Cross Processing
p.131
White Balance
F/G/H/^/JD/JN/JW/JL/I/
L/f/K
p.124
Sensitivity -2.0 to +2.0 —
High-ISO NR Auto/Low/High p.85
Shadow Correction Auto/On/Off p.129
Distortion Correction On/Off p.149
To Next Page
Loading...
