188
Changing Additional Settings
8
4
Use the four-way controller (45)
to select a destination city.
Turn the e-dial to change the region.
The location, time difference and current
time of the selected city appear.
5
Press the four-way controller (3) to select [DST], and use
the four-way controller (45) to select O or P.
Select O if the destination city uses daylight saving time (DST).
6
Press the 4 button.
The destination setting is saved and the camera returns to the [World
Time] screen.
7
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
• Refer to “List of World Time Cities” (p.189) for cities that can be selected as
a destination.
• Select W (Hometown) in Step 3 to change the city and DST setting.
• X appears in the control panel and guide display (p.69) if [Setting the Time]
is set to X (Destination). Also, the video output setting (p.169) changes to
the video output format for that city.
Destination
London
+06:00
16:00
DST
Cancel
OK
OK
MENU
To Next Page
Loading...
