89
Shooting Functions
4
You can set the position and range of the autofocusing area (AF area).
1
Select [AF Select (25 Points)] or [Select] in Step 3 on p.88,
and press the 4 button.
The camera returns to the control panel.
2
Press the M button twice.
The camera is ready to take a picture.
3
Press the 4 button.
The position and range of the AF area can be changed.
4
Select the AF area.
Available operations
5
Press the 3 button.
The AF area is set.
Selecting the Desired Focusing Area
Four-way controller
(2345)
Moves the AF area.
E-dial to the right (y) Increases the size of the AF area (when [AF Select
(25 Points)] is selected).
E-dial to the left (f) Reduces the size of the AF area (when [AF Select
(25 Points)] is selected).
4 button Returns the AF area to the center.
The set AF area remains in the memory even if the autofocus method is
changed or the camera is turned off.
MENU
Exit
To Next Page
Loading...
