97
Shooting Functions
4
3
Use the four-way controller (45)
to select k or l, and press
the 4 button.
The camera returns to the control panel.
4
Press the shutter release button halfway.
k appears on the monitor and the
Shake Reduction function is activated.
k Uses Shake Reduction. (default setting)
l
Does not use Shake Reduction.
Be sure to turn the Shake Reduction function off when using the camera with
a tripod.
• You can also change the setting from the [A Rec. Mode 3] menu (p.66).
•
[Shake Reduction] is fixed to
l
in the following situations.
- Self-timer shooting
- Remote Control shooting
- when the shutter speed is set to h
• [Shake Reduction] is fixed to k when the capture mode is set to Z (Night
Scene HDR) or p (HDR) of H (Scene) mode.
• You can select whether to use the Shake Reduction function only when
taking pictures or during standby mode as well with [4. Shake Reduction
Options] (p.68) from the [A Custom Setting 1] menu.
• The Shake Reduction function will not fully work (for about 2 seconds) right
after turning on the camera or restoring from Auto Power Off. Wait for the
Shake Reduction function to work stably and properly, and then press the
shutter button gently.
• The Shake Reduction function is available with any PENTAX Q-mount lens
compatible with this camera.
Shake Reduction
On
Cancel
OK
OK
MENU
1/
2000
F2.8
1600
[
37
]
To Next Page
Loading...
Need help?
General
