42 . Lambda XLS/XLS+ User's Guide
Press to display the available Options, which you can select using the keypad
numbers:
1 Method Settings Returns to the Method Settings screen.
2 Print Prints the result using the printer selected in the Utilities folder.
3 A/%T Toggles between Absorbance and %Transmission mode.
4 Print Graph Prints the graph (this option is grayed out if no data are available).
7 Sample Number Adds a prefix to the sample number and resets the incrementing
number to the desired value.
8 Save Method Use the left and right arrows to select the folder you want to store the
method in (Favorites/Methods 1–9/SD Memory Card), then press the
down arrow and enter a name for the method. Press Save
to save
the method.
9 Auto-Print Toggles Auto-Print on and off.
Press or , or wait 20 seconds to exit the method options.
Press
to return to the Standard Methods folder after all your samples have been
measured.
To Next Page
Loading...
Need help?
General
