PerkinElmer Spectrum 100 Series User Manual

42 . Spectrum 100 Series User’s Guide
7. Browse to the configuration file, then click Copy Configuration.
The Test Configuration page is displayed.
This test automatically checks whether your PC and instrument can communicate
with each other.
Assuming this Connection is working, the page then displays the Serial Number
and Firmware Version reported by your instrument, confirms that the installation
of the Instrument Configuration is complete, and displays the Instrument Type
recognized by the Spectrum software.
8. When this page is Completed, check that the information displayed is as expected.
Likely causes of any discrepancies include out-of-date firmware or configuration
data. Ask your PerkinElmer Service representative for advice.

PerkinElmer Spectrum 100 Series Specifications

General

Brand	PerkinElmer
Model	Spectrum 100 Series
Category	Measuring Instruments
Language	English