KENR6933 103
Troubleshooting Section
i02539800
E2143 Low Engine Coola nt
Level
Conditions Wh
ich Generate This Code:
This event code will only be generated if a coolant
level sensor h
as been properly installed and the
customer programmable feature has been enabled.
The Electroni
c Control Module (ECM) detects a
problem with the engine coolant level. If the engine
coolant level is low for more than thirty seconds, this
code will be g
enerated.
System Response:
The event code will be active and the event code will
be logged.
The optional shutdown lamp will be illuminated.
The optional
warninglampwillbeilluminated.
If the optional shutdown feature is enabled, then the
engine will b
e shutdown.
Possible Performance E ffect:
E2143-3
If the applic
ation has enabled the optional shut down
feature then the engine will shut down.
Troublesho
oting:
The event code may represent a problem with the
electronic
system. This event normally indicates
low engine coolant. Refer to Testing and Adjusting
Manual, “Cooling System - Inspect”.
Results:
•
OK – STOP.
To Next Page
Loading...
