PFT G4 - Dimension Drawing; Type Plate

Mixing Pump PFT G4
Technical data
24 2007-09-05
Pos: 3.23 /KN2006-SM/ Technische Daten/007 1. 1 Maßblatt_Titel @ 9\mod _1143990330418_2933 61.doc @ 293612
3.6 Dimension drawing
Pos: 3.24 /KN2006-Pr ojekte/Knauf/Techni sche Daten/Mischpu mpe PFT G4/Maßblatt @ 12\ mod_1152267218000_29336 1.doc @ 298797
6
5
4
3
2
1
PFT G4
Ca.1300 mm
Ca.750 mm
C
a
,
1
5
0
0
m
m
Fig. 4: Dimension drawing
Pos: 3.25 /KN2006-SM/nL---------- Abschnittsende ---------- @ 8\mod_1141997892953_0.doc @ 293763
Pos: 3.26 /KN2006-SM/ Technische Daten/008 1. 1 Typenschild_Tite l @ 9\mod_1144045129972_ 293361.doc @ 293614
3.7 Type plate
Pos: 3.27 /KN2006-Pr ojekte/Knauf/Techni sche Daten/Mischpu mpe PFT G4/Typenschild @ 12\ mod_1152267632590_2 93361.doc @ 298799
Fig. 5: Type plate
The type plate is located on the inside of the tool box and contains
the following information:
 Manufacturer
 Machine type
 Year of manufacture
 Serial identification number
 Allowable total weight
 Axle load limit
 Manufacturer's address
59 ''
29.5 ''
51 ''