PFT G4 - Troubleshooting

Mixing Pump PFT G4
Troubleshooting
2007-09-05 53
Pos: 7.1 /KN2006-Pr ojekte/Knauf/Störun gen/Mischpumpe PFT G4/1 St örungen_Titel+ Text (Maschine, Betriebs anleitung) @ 43\mod_118 5106625143_293361. doc @ 544522
7 Troubleshooting
Possible causes for operational issues/problems and the tasks to
correct these issues are described in this chapter.
If operational issues occur more frequently, the maintenance
intervals must be shortened in accordance with the actual usage of
the machine.
Contact the manufacturer if there are issues that cannot be
corrected by following the instructions below; see the service
address on page 2 of this Operating Manual.
Pos: 7.2 /KN2006-SM/S törungen/002 1 Sicher heit_Titel @ 9\mod_1144 439648502_293361.doc @ 293704
7.1 Safety
Pos: 7.3 /KN2006-Projekte/Knauf/Störungen/Mischpumpe PFT G4/1.1.0 Personal --> Standard (Betriebsanleitung) @ 43\mod_1185106843413_293361.doc @ 544537
Personnel
 The troubleshooting described herein can be executed by the
operator unless otherwise indicated within this Operating
Manual.
 Some tasks should only be executed by especially trained,
specialized personnel, or exclusively by the manufacturer;
specific reference will be made in each case in the description
of the respective troubleshooting tasks.
 Only certified electricians should perform work on the electrical
equipment.
Pos: 7.4 /KN2006-Pr ojekte/Knauf/Störun gen/Mischpumpe PFT G4/Per sönliche Schutzausr üstung @ 12\mod_11525 25663739_293361.do c @ 298840
Personal protective equipment
Wear the following protective equipment for all troubleshooting
work:
 Protective work clothing
 Protective goggles
 Protective gloves
 Safety footwear
Pos: 7.5 /KN2006-Pr ojekte/Knauf/Störun gen/Mischpumpe PFT G4/1. 1.0 Grundlegendes_A NSI (Fokus Personal) @ 43\mod_1185107396384_29 3361.doc @ 544552
WARNING
Injury hazard due to insufficient qualification!
Not being aware of potential risks during troubleshooting may
result in property damage, serious injury or even death.
Troubleshooting and repair work shall only be executed by
personnel being qualified, trained and authorized in this
respect. When in doubt, always contact the manufacturer!
Pos: 7.6 /KN2006-SM/nL---------- Abschnittsende ---------- @ 8\mod_1141997892953_0.doc @ 293763
Pos: 7.7 /KN2006-Pr ojekte/Knauf/Störun gen/Mischpumpe PFT G4/1. 1.0 Grundlegendes_A NSI @ 37\mod_1177407522 291_293361.doc @ 447618
WARNING
Injury hazard posed by improper troubleshooting!
Prior to starting work, ensure that there is adequate space for
installation. Ensure order and cleanliness at the installation
location! Loose parts and tools are accident hazards!
If components have been removed, ensure that they are
properly re-installed, that all fastening elements are re-
installed, and that all threaded connections are tightened with
appropriate torque.
Pos: 7.8 /KN2006-SM/nL.......... Seitenumbruch .......... @ 8\mod_1141998334703_0.doc @ 293764