PFT G4 - 9 Dismantling; Safety

Mixing Pump PFT G4
Dismantling
70 2007-09-05
Pos: 9.1 /KN2006-SM/De montage/001 1 Demontage_ Titel @ 9\mod_1144501489 239_293361.doc @ 293741
9 Dismantling
Pos: 9.2 /KN2006-SM/De montage/001 1.0 Nachde m das Gebrauchsende err eicht ist...(Maschine) @ 41\mod_1183385607485_293361.doc @ 503422
At the end of the machine's service life, the machine must be
dismantled and disposed of in an environmentally responsible
manner.
Pos: 9.3 /KN2006-SM/nL---------- Abschnittsende ---------- @ 8\mod_1141997892953_0.doc @ 293763
Pos: 9.4 /KN2006-SM/De montage/002 1 Sicherhei t_Titel @ 9\mod_1144870 285363_293361.doc @ 293744
9.1 Safety
Pos: 9.5 /KN2006-SM/Demontage/003 1.1.0 Personal --> Standard --> ggf. anpassen @ 9\mod_1144870288160_293361.doc @ 293747
Personnel
 Only trained, specialized personnel should perform dismantling
work.
 Only certified electricians should perform work on the electrical
equipment.
Pos: 9.6 /KN2006-SM/nL---------- Abschnittsende ---------- @ 8\mod_1141997892953_0.doc @ 293763
Pos: 9.7 /KN2006-Pr ojekte/Knauf/Demont age/Mischpumpe PFT G4/1. 1.0 Grundlegendes_A NSI (Maschine) @ 37\ mod_1177411192715_29336 1.doc @ 447866
WARNING
Improper dismantling poses an injury hazard!
Stored residual energy, sharp-edged components, points and
corners on and in the machine, or on the necessary tools can
cause serious injuries.
Prior to starting work, ensure that there is adequate space.
Handle open, sharp-edged components carefully.
Ensure order and cleanliness at the workstation!
Loose parts and tools are accident hazards!
Dismantle components properly.
Pay attention to the high dead weight of the components.
Use hoist equipment if necessary. Secure the components so
that they do not fall down or fall over.
Consult with the manufacturer if there are questions.
Pos: 9.8 /KN2006-SM/nL---------- Abschnittsende ---------- @ 8\mod_1141997892953_0.doc @ 293763
Pos: 9.9 /KN2006-Pr ojekte/Knauf/Demont age/Mischpumpe PFT G4/1. 1.0 Elektrische Anlag e_ANSI @ 37\mod_117741129 2095_293361.doc @ 447880
DANGER
Life-threatening danger due to electric shock!
There is a danger to life when touching live components.
Switched-on electrical components can move unexpectedly
and can cause serious injuries. Prior to dismantling the
machine switch off the electrical supply and permanently
disconnect it.
Pos: 9.10 /KN2006-SM/nL.......... Seitenumbruch .......... @ 8\mod_1141998334703_0.doc @ 293764