PFT G4 - Safety; Responsibility of the owner

Mixing Pump PFT G4
Safety
2007-09-05 9
Pos: 2.1 /KN2006-SM/Si cherheit/001 1 Sicher heit_Titel @ 8\mod_114 2425976781_293361. doc @ 293586
2 Safety
Pos: 2.2 /KN2006-Pr ojekte/Knauf/Sic herheit/Mischpumpe PFT G4/001 1.0 Einführung (Masc hine) @ 43\mod_118492947 6207_293361.doc @ 515072
This section provides an overview of all the important safety
aspects for the protection of personnel and third parties, and for
safe and trouble-free operation of the machine.
Significant hazards can occur if the handling instructions and
safety instructions in this Operating Manual are not followed.
Pos: 2.3 /KN2006-SM/nL---------- Abschnittsende ---------- @ 8\mod_1141997892953_0.doc @ 293763
Pos: 2.4 /KN2006-SM/Si cherheit/003 1.1 Veran twortung des Betreiber s_Titel @ 8\mod_114242 8931187_293361.doc @ 293588
2.1 Responsibility of the owner
Pos: 2.5 /KN2006-SM/Si cherheit/003 1.1.0 Ver antwortung des Betrei bers allgemeiner Teil (Maschine) @ 41\mod_118 3384616129_29336 1.doc @ 503346
The machine is used in commercial applications. Consequently the
operator of the machine is subject to the legal responsibilities of
industrial safety standards.
In addition to the safety instructions in this Manual, all applicable
accident prevention guidelines and environmental protection
guidelines must be heeded and complied with. In this regard:
 The owner must know all applicable industrial safety
regulations. In a hazard analysis, the owner must identify other
hazards that may exist at the installation site due to any special
work conditions. The owner must apply this information during
the operation of the machine.
 During the entire period of operation of the machine, the owner
must ensure that his operating instructions comply with the
current state of legislation. If necessary the owner must adapt
these operating instructions.
 The owner must clearly regulate and specify responsibilities for
installation, operation, maintenance, and cleaning of the
machine.
 The owner must ensure that all employees who handle the
machine have read and understood this Manual.
In addition, the owner must train and inform personnel with
regards to hazards at regular intervals.
 The owner must provide the required protective equipment for
personnel to operate the machine.
Moreover the owner is responsible for ensuring that the machine is
always in perfect operating condition; consequently the following
applies:
 The owner must ensure that the maintenance intervals
described in this Manual are strictly observed.
 The owner must regularly inspect all safety devices for function
and completeness.
Pos: 2.6 /KN2006-SM/nL---------- Abschnittsende ---------- @ 8\mod_1141997892953_0.doc @ 293763