Mixing Pump PFT G4
Operation
2007-09-05 37
Fig. 20: Water inlet sieve
5. Ensure that the water inlet sieve (Fig. 20/1) is clean.
Fig. 21: Connecting the water
6. Clean and vent the water hose.
7. Connect the water hose on the water hose connection and on
the water inlet (Fig. 21/arrow).
Only use clean water that is free of solids. The minimum
pressure for the running machine is 2.5 bar (36.2 psi).
Fig. 22: Debris collector sieve
8. Ensure that the debris collector sieve (Fig. 22/1) in the pressure
reducer is clean.
To Next Page
Loading...
