Philips Efficia CM Series - Page 89

Troubleshooting
Efficia CM Series Repair Guide 3-31
Error Codes
888
System could not load font
files. Please upgrade
software.
System Error (888)
The monitor could not
load the font files.
Upgrade the software. See the
Efficia CM Series Service Guide.
889
System Error (889)
The file system on the
flash memory is
corrupted.
Shut down (see “Shutting Down the
Monitor” on page 4-1) and restart
the monitor.
If the problem persists, upgrade the
software. See the Efficia CM Series
Service Guide.
900
C.O. FIFO Overrun
Cardiac output FIFO
overrun
Informational message. No action
required.
920
FGPA FIFO Overrun
Recorder received
FIFO overrun.
Informational message. No action
required.
921
FGPA FIFO Overrun
Recorder transmitted
FIFO overrun.
Informational message. No action
required.
1025
System Error (1025)
Could not load
ResourceDLL.dll.
Shut down (see “Shutting Down the
Monitor” on page 4-1) and restart
the monitor.
If the problem persists, replace the
main board. See “Replacing the
Main Board” on page 4-27.
1026
System Error (1026)
Could not load data
from flash.
Shut down (see “Shutting Down the
Monitor” on page 4-1) and restart
the monitor.
If the problem persists, replace the
main board. See “Replacing the
Main Board” on page 4-27.
1027
System Error (1027)
Could not start the
front end.
Shut down (see “Shutting Down the
Monitor” on page 4-1) and restart
the monitor.
If the problem persists, replace the
main board. See “Replacing the
Main Board” on page 4-27.
1028
System Error (1028)
Could not stop the
front end.
Shut down (see “Shutting Down the
Monitor” on page 4-1) and restart
the monitor.
If the problem persists, replace the
main board. See “Replacing the
Main Board” on page 4-27.
Code Description Possible Cause Action