To Next Page

To Previous Page

2 Monitoring or Collecting Vital Signs

tone. No alarms will be available for the measurements when the devices are out of range, as alarms are

only available on the patient monitor.

Keep the patient monitor with the patient during transport.

Controls Available With a Telemetry Device

The controls available when the Cableless Measurement Device is assigned to a TRx4841/TRx4851A

Transceiver or MX40 wearable patient monitor with a short range radio adapter (SRRA) are described

in the table below.

NOTE

When you unplug the ECG cable from the telemetry device and plug it into the monitor associated

with the same patient, the ECG source will automatically be from the monitor. The SpO

and/or NBP

measurement devices assigned to the telemetry device will continue to source data to the telemetry

device and the Information Center. You may need to change screens on the patient monitor to see the

measurements.

Action At the Cableless

Measurement Device

At the IIC

SpO

Start SpO

Yes Yes

Change SpO

Mode Yes Yes

Select SpO

Repetition Time Yes No

Assign SpO

Pod Yes No

Remove SpO

Pod Yes Yes

Change Alarm Limits No Yes

Place Device in Standby No No

Alarm Silence No Yes

Alarm Off/Pause No Yes

NBP

Start/Stop/Stat NBP Yes No

Change NBP Mode Yes No

Change NBP Repetition Time Yes No

Change Alarm Limits No Yes

Assign NBP Pod Yes No

Remove NBP Pod Yes Yes

Place Device in Standby No No

Alarm Silence No Yes

Alarm Off/Pause No Yes

Brand	Philips
Model	IntelliVue CL SpO2
Category	Measuring Instruments
Language	English

Philips IntelliVue CL SpO2 User Manual

Table of Contents

Questions and Answers:

Philips IntelliVue CL SpO2 Specifications

Related product manuals