1
7
1Introduction and Basic
Operation
These Instructions for Use are for clinical professionals using the IntelliVue Cableless Measurements
and their respective accessories for monitoring and recording arterial oxygen saturation, pulse rate and
non-invasive blood pressure of adult and pediatric patients together with:
• IntelliVue Patient Monitors MP5/MP5SC/MP5T, MP2 or X2
• IntelliVue Telemetry System Transceivers TRx4841A/TRx4851A and MX40 wearable patient
monitors
• IntelliVue GuardianSoftware
This section gives you an overview of the cableless measurements and how they are used. The
remaining sections tell you how to perform individual measurements, and how to care for and
maintain the equipment.
Familiarize yourself with all instructions including warnings and cautions, and attend one of the
training courses, before starting to make measurements with patients. Read and keep the Instructions
for Use that come with any accessories, as these contain important information about care and
cleaning that is not repeated here.
When using the IntelliVue Cableless Measurements with an IntelliVue Patient Monitor, a telemetry
system or IntelliVue GuardianSoftware, refer to and adhere to all warnings in the Instructions for Use
of the respective device.
In these Instructions for Use:
•A warning alerts you to a potential serious outcome, adverse event or safety hazard. Failure to
observe a warning may result in death or serious injury to the user or patient.
•A caution alerts you to where special care is necessary for the safe and effective use of the
product. Failure to observe a caution may result in minor or moderate personal injury or damage
to the product or other property, and possibly in a remote risk of more serious injury.
IntelliVue Cableless Measurements refers to the IntelliVue Cableless Measurements product family
consisting of the IntelliVue CL SpO
2
Pod and IntelliVue CL NBP Pod with their accessories. Also
included are the auxiliary devices: the IntelliVue CL Charging Station, IntelliVue CL Transmitter,
IntelliVue CL Transmitter Base station and IntelliVue CL Hotspot. Display refers to the physical
display of the CL device. Screen refers to everything you see on the IntelliVue CL measurement's
display, such as measurement values, patient data and so forth.
To Next Page
Loading...
Need help?
General
