1 Introduction and Basic Operation
8
Introducing the IntelliVue Cableless Measurements
The IntelliVue Cableless Measurements family consists of measurement devices and auxiliary devices.
The measurement devices are introduced here. Refer to “Introducing the Cableless Measurement
Auxiliary Devices” on page 17 for an introduction to the auxiliary devices.
The cableless measurement devices provide measurement values on the built-in display and
communicate them to other system components using a wireless short range radio (SRR) interface.
They can also be controlled via SRR from an assigned patient monitor, an IntelliVue Information
Center via a telemetry device, or IntelliVue GuardianSoftware. They have an LCD display and three
keys for basic operation e.g. to assign the device to a patient.
IntelliVue CL SpO2 Pod
The IntelliVue CL SpO
2
Pod is a battery powered, cableless Pulse Oximetry measuring device. It is a
wrist-worn device; you need a Mobile CL SpO
2
Cradle to hold the sensor connector in place and a
wristband to fix the cradle to a patient's arm.
Specialized single-patient SpO
2
sensors are available for use with the IntelliVue CL SpO
2
Pod. For
details regarding the complete set of single-patient supplies, cradle, wristband and sensors, refer to the
chapter “IntelliVue CL SpO2 Pod Accessories” on page 61.
IntelliVue CL SpO
2
Pod IntelliVue CL NBP Pod
To Next Page
Loading...
