3
1Table of Contents
1 Introduction and Basic Operation 7
Introducing the IntelliVue Cableless Measurements 8
Operating and Navigating 10
Operating Modes 14
Using the Patient Menu 15
Using Profiles 16
Setting the Date and Time 16
Introducing the Cableless Measurement Auxiliary Devices 17
Charging IntelliVue Cableless Measurement Devices 20
2 Monitoring or Collecting Vital Signs 23
IntelliVue Cableless Measurements Use Models 23
Trending 24
Assigning an IntelliVue Cableless Measurement Device to a Patient Monitor or Telemetry Device 25
Controls Available with a Patient Monitor 27
Controls Available With a Telemetry Device 28
Controls Available with GuardianSoftware 29
3 Monitoring SpO2 31
SpO2 Sensors 31
Connecting SpO2 Sensors 32
Applying the Sensor 33
Measuring SpO2 34
Selecting Measurement Modes 34
Understanding SpO2 Numerics and Symbols 35
Assessing a Suspicious SpO2 Reading 36
Changing the Averaging Time 36
Understanding SpO2 Alarms 36
Perfusion Numeric (only available on the Patient Monitor) 37
4 Monitoring NBP 39
Introducing the Oscillometric NBP Measurement 39
Preparing to Measure NBP 41
Starting and Stopping Measurements 43
Enabling Automatic Mode and Setting Repetition Time 43
Enabling Sequence Mode and Setting Up The Sequence 43
Understanding the NBP Numerics and Symbols 44
Correcting the Measurement if Limb is not at Heart Level 45
Switching Pulse from NBP On/Off 45
Assisting Venous Puncture 45
To Next Page
Loading...
