10 Specifications
67
Symbols
These symbols can appear on the cableless measurement devices and associated equipment.
Installation Safety Information
Symbols
Caution, consult
accompanying
documents
Refer to accompanying
documents
Protective earth
Equipotential grounding Alternating current Connector has special
protection against electric
shocks and is defibrillator
proof
Error LED Built-in wireless network
(WLAN)
USB interface
Non-ionizing radiation
symbol
NBP identifier SpO
2
identifier
Always use separate
collection for waste
electrical and electronic
equipment (WEEE)
Identifies year and
month of manufacture
Indicates location of the
date of manufacture and/
or name and address of
manufacturer
Indicates location of
serial number
Indicates location of
catalog number
Indicates location of
service number
Followed by two
alphanumeric characters,
indicates ingress
protection grade
LAN connection
indicator for connection
to a wired network
Grounding The charging station must be grounded during operation. If a three-wire receptacle
is not available, consult the hospital electrician. Never use a three-wire to two-wire
adapter.
Equipotential Grounding If the charging station is used in an OR, ensure that the room incorporates an
equipotential grounding system to which the charger has a connection.
Combining Equipment Combinations of medical equipment with non-medical equipment must comply
with IEC 60601-1-1. Never use a multiple portable socket-outlet or extension cord
when combining equipment unless the socket outlet is supplied specifically for use
with that equipment.
Fusing The charging station uses double pole/neutral fusing.
To Next Page
Loading...
Need help?
General
