Philips IntelliVue CL SpO2 User Manual

10
65
10Specifications
The specifications in this section apply to the:
• IntelliVue CL SpO
2
Pod
• IntelliVue CL NBP Pod
• IntelliVue CL Charging Station
• IntelliVue CL Transmitter
• IntelliVue CL Transmitter Base Station
• IntelliVue CL Hotspot
The IntelliVue Cableless Measurements might not meet the performance specification listed in this
chapter, if stored or operated outside the specified environmental conditions.
WARNING
The IntelliVue Cableless Measurement Devices are not intended for use in an MRI environment or in
an oxygen-enriched environment (e.g. hyperbaric chambers). During MR imaging, remove all
IntelliVue Cableless Measurement Devices and sensors from the patient. Induced currents could cause
burns.
Intended Use
IntelliVue CL SpO2 Pod:
The IntelliVue CL SpO
2
Pod is indicated for use by health care professionals whenever there is a need
for acquisition or monitoring of physiological patient parameters SpO
2
and pulse rate wirelessly.
The intended use of the IntelliVue CL SpO
2
Pod when used together with a patient monitor or with a
telemetry system transceiver is for monitoring and recording of and to generate alarms for arterial
oxygen saturation and pulse rate of adult and pediatric patients.
The IntelliVue CL SpO
2
Pod is also intended for acquisition of arterial oxygen saturation and pulse
rate data of adult and pediatric patients for a clinical information management system.
The IntelliVue CL SpO
2
Pod is intended for use by health care professionals inside hospitals. It is not
intended for home use. It is not a therapeutic device.

Philips IntelliVue CL SpO2 Specifications

General

Brand	Philips
Model	IntelliVue CL SpO2
Category	Measuring Instruments
Language	English