Philips IntelliVue CL SpO2 User Manual

2 Monitoring or Collecting Vital Signs
29
NOTE
The SpO
2
measurement sourced from the telemetry device (label: SpO
2
T) has priority over the
IntelliVue CL SpO
2
measurement. The SpO
2
T measurement is sent to the Information Center as long
as it is available and the IntelliVue CL SpO
2
measurement is available on the measurement device only.
Controls Available with GuardianSoftware
The controls available when the Cableless Measurement Device is assigned to GuardianSoftware are
described in the table below.
Action At the Cableless
Measurement Device
At GuardianSoftware
SpO
2
Start SpO
2
Yes Yes
Change Mode Yes Yes
Select SpO
2
Repetition Time Yes Yes
Assign SpO
2
Pod Yes Yes
Remove SpO
2
Pod Yes Yes
Place Device in Standby No No
Technical Alarm Silence No Yes
Alarm Off/Pause No No
NBP
Start/Stop/Stat NBP Yes Yes
Change NBP Mode Yes Yes
Change NBP Repetition Time Yes Yes
Assign NBP Pod Yes Yes
Remove NBP Pod Yes Yes
Place Device in Standby No No
Technical Alarm Silence No Yes
Alarm Off/Pause No No

Philips IntelliVue CL SpO2 Specifications

General

Brand	Philips
Model	IntelliVue CL SpO2
Category	Measuring Instruments
Language	English