11
85
11Default Settings Appendix
This appendix documents the most important default settings of your IntelliVue Cableless
Measurement Devices as they are delivered from the factory. For a comprehensive list and explanation
of default settings, see the Configuration Guide supplied with your devices. The default settings can be
permanently changed in Configuration Mode.
SpO2 Default Settings
NBP Default Settings
SpO
2
Settings Factory Defaults
Mode Continuous
Repeat Time 15 min
Label SpO₂
SpO₂ On
Pulse On
Signal Quality On
Average 10 sec
Average In Mon. No
NBP Alarm Suppr. On
Aging Time 10 min
Color Cyan
NBP Setting Factory Defaults
Mode Auto
Repeat Time 10 min
NBP On
Pulse On
VP Pressure
60 mmHg
Reference Auscultatory
Unit mmHg
To Next Page
Loading...
Need help?
General
