Philips PageWriter TC70 - Changing the Date and Time

Changing the Date and Time Cardiograph Care and Maintenance
PageWriter TC 70 Cardiograph Service Manual 2-17
Changing the Date and Time
The date and time that displays on the cardiograph may be changed manually, or may be
configured to automatically synchronize with a specified TraceMaster server using the Time
Synchronization feature. For more information on configuring the Time Synchronization
feature on the cardiograph, see the PageWriter TC70 Network Configuration Guide on the
User Documentation CD.
Follow the procedure below to manually set the date or time.
NOTE Opening the Setup screens may require entering a password. If a password is lost and cannot be
retrieved, call the Philips Response Center for further assistance. See "Contacting a Philips Response
Center" on page 1-38.
To set the date and time:
1
Touch the Setup button on the main toolbar.
2 The Configuration Setup and Service Utilities menu appears. Touch the button next to
Configure TraceMaster and OrderVue Settings.
3 The Configure Network Settings screens appear. Touch the TraceMaster/OrderVue
button (top of screen).
4 The TraceMaster settings screens appear. The Create TraceMaster Connection tab is
selected. Touch the
Edit/Delete TraceMaster Connection tab (top of screen).
5 Under Time Synchronization Settings (middle of screen), touch the Set button next to
Manual Time Set.
6 The Date and Time Settings window appears with the current specified date and time
displayed. To change the current date, touch the back or forward arrows next to the name
of the displayed month (to change the month), or touch a date on the calendar to change
the date within the displayed month.
7 To change the displayed time, touch the hour and minutes displayed under Current Time,
or touch the up or down arrow buttons next to the displayed time to manually change the
time. Touch the time designator to change it to
AM or to PM.
8 Touch the dropdown arrow button under Time Zone to change the selected time zone.
NOTES The time displayed on the cardiograph automatically adjusts for Daylight Savings Time, if
applicable.
Touch the Time Sync button to manually synchronize the cardiograph date and time with a
specified TraceMaster server.
9
Touch the OK button when done. Touch the Exit button (lower right corner of screen) to
exit the Setup screen. The new time and date is immediately applied.