Wireless Troubleshooting Troubleshooting
PageWriter TC 70 Cardiograph Service Manual 3-33
Wireless Troubleshooting
All wireless LAN troubleshooting topics are included in this section. For further assistance
with configuring the cardiograph for wireless transmission to a TraceMasterVue ECG
Management System, see the Installing TraceMasterVue and Configuring Communication
Guide available for download from the Philips InCenter web site (
incenter.medical.philips.com).
Table 3-14 Wireless Issues
Symptom Possible Cause &
Investigation Step
Possible Solutions
LAN/WLAN
connection is not
available
message
The network connection
has been broken.
Contact your IT department.
Invalid IP Address
message
Incorrect IP address
specified in the
cardiograph’s
TraceMasterVue
configuration.
1 Check the cardiograph’s TraceMaster
configuration settings.
2 Contact the TraceMasterVue system administrator
for information.
Invalid Subnet Mask
message
Incorrect subnet mask
specified in the
cardiograph’s
TraceMasterVue
configuration.
1 Check the cardiograph’s TraceMasterVue
configuration settings.
2 Contact the TraceMasterVue system administrator
for information.
Invalid Default
Gateway
message
Incorrect default
gateway specified in the
cardiograph’s
TraceMasterVue
configuration.
1 Check the cardiograph’s TraceMasterVue
configuration settings.
2 Contact the TraceMasterVue system administrator
for information.
Invalid Primary
WINS
message
Incorrect Primary
WINS specified in the
cardiograph’s
TraceMasterVue
configuration.
1 Check the cardiograph’s TraceMasterVue
configuration settings.
2 Contact the TraceMasterVue system administrator
for information.
Invalid Primary
DNS
message
Incorrect Primary DNS
specified in the
cardiograph’s
TraceMasterVue
configuration.
1 Check the cardiograph’s TraceMasterVue
configuration settings.
2 Contact the TraceMasterVue system administrator
for information.
Invalid directory
message
Incorrect directory
specified in the
cardiograph’s
TraceMasterVue
configuration.
1 Check the cardiograph’s TraceMasterVue
configuration settings.
2 Contact the TraceMasterVue system administrator
for information.